The password at email ID as intimated at the time of registration. Please note that, the registration form has to be submitted to the DP within 90 days other then the sole holder BOs from the date of registration failing which your registration for ‘easiest’ will be automatically deleted by the system. Microsoft Toolkit is an official application specially made for the Windows machines, which are free of charge. The latest version of the software can use for the activation of both Windows and Microsoft Office. Nevertheless, it will support you to control, license, and use the Microsoft Office and Microsoft Windows 10 as well. If you're prompted for an administrator password or confirmation, type the password or provide confirmation. Under Performance, click Settings. Click the Data Execution Prevention tab, and then click Turn on DEP for all programs and services except those I select.
The following example sets the default device and directory to DMA1:[SMITH.COM]:
2.3.7 Setting DCL Verification
Use the SET PROFILE/VERIFY command to turn on DCL verification, which displays DCL command lines and data lines as they execute.
SYSMAN can execute DCL commands using the DO command. By default, SYSMAN DCL verification is turned off.
Example
2.3.8 Executing DCL Commands from SYSMAN
The SYSMAN command DO executes DCL command procedures and SYSMAN command procedures on all nodes in an OpenVMS Cluster environment. In an OpenVMS Cluster environment or in any environment with multiple nodes, you enter a set of commands once, and SYSMAN executes the commands sequentially on every node in the environment. SYSMAN displays the name of each node as it executes commands, or an error message if the command fails.
If a node does not respond within a given timeout period, SYSMAN displays a message before proceeding to the next node in the environment. You can specify a timeout period with the SET TIMEOUT command.
Each DO command executes as an independent subprocess, so no process context is retained between DO commands. For this reason, you must express all DCL commands in a single command string, and you cannot run a procedure that requires input.
In an OpenVMS Cluster environment, SYSMAN executes DO commands sequentially on all nodes in the cluster. After a command completes or times out on one node, SYSMAN sends it to the next node in the environment. Any node that is unable to execute a command returns an error message.
For more information about using the DO command to manage an OpenVMS Cluster system, see Section 20.6. You can also refer to the OpenVMS System Management Utilities Reference Manual for a complete description of the SYSMAN command DO.
Example
In the following example, SYSMAN runs the INSTALL utility and makes a file known on all nodes in the cluster when you enter the commands from the local node:
2.3.9 Creating SYSMAN Command Procedures
The SYSMAN execute procedure (@) command executes SYSMAN command procedures on each node in the environment.
Example
The following example creates and executes a SYSMAN command procedure to display the current date and system time for each OpenVMS Cluster node:
2.3.10 Setting Up SYSMAN with an Initialization File
You can create an initialization file that is used each time you invoke SYSMAN. In the initialization file, you can perform tasks such as defining keys and setting up your environment.
The default file specification for the SYSMAN initialization file is SYS$LOGIN:SYSMANINI.INI. If you want your SYSMAN initialization file to have a different file specification, you must define the logical name SYSMANINI to point to the location of the file.The following is a sample initialization file that defines several keys:
The operator communication manager (OPCOM) is a tool for communicating with users and operators on the system. OPCOM allows you to perform the following functions:| For More Information | |
|---|---|
| To broadcast messages to users who are logged in | Section 2.4.3 |
| To control the use of OPA0: as an operator terminal | Section 2.4.4 |
| To designate terminals as operator terminals, enabling them to display messages broadcast by OPCOM | Section 2.4.5 |
| To record messages broadcast by OPCOM in a log file | Section 18.6.3 |
| To send requests to an operator¹ | Section 2.4.6 |
| To reply to operator requests¹ | Section 2.4.7 |
2.4.1 Understanding OPCOM
Figure 2-3 illustrates the function of OPCOM.
Figure 2-3 Operator Communication Manager (OPCOM)
OPCOM Components
| Description | For More Information | |
|---|---|---|
| OPCOM process | The system process that manages OPCOM operations. Unless you disable it, the OPCOM process starts automatically at system startup time. | Section 2.4.2 |
| Operator terminals | Terminals designated to display messages broadcast by OPCOM. Usually, the console terminal (with the device name OPA0:) is the operator terminal. However, you can designate any user terminal as an operator terminal. | Section 2.4.5 |
| Operator log file | A file that records messages broadcast by OPCOM. The file is named SYS$MANAGER:OPERATOR.LOG. | Section 18.6.1 |
| OPCOM messages | Messages broadcast by OPCOM. These messages are displayed on operator terminals and written to the operator log file. The messages might be general messages sent by you, user requests, operator replies, or system events. | Section 18.6.2 |
| REPLY and REQUEST commands | DCL commands that allow you to use and control OPCOM. | Section 2.4.3, Section 2.4.6, and Section 2.4.7 |
OPCOM Defaults
OPCOM uses the following defaults:
- OPCOM is started by default on all systems.
- Except for workstations in an OpenVMS Cluster environment, OPCOM logs messages to OPA0:, which is enabled by default as an operator terminal. The log file SYS$MANAGER:OPERATOR.LOG is opened, and all OPCOM classes are enabled on both the operator terminal and the log file.
Section 2.4.4 explains how to control the use of OPA0: as an operator terminal. Section 18.6.3.2 explains how to specify the default state of operator log files.
OPCOM Requirements
OPCOM has the following requirements:
- To execute a REPLY command, OPCOM must be running, and you must enter REPLY from a terminal device designated as an operator terminal.
- The REPLY command requires at least OPER privilege. You must have SHARE privilege if another process is logged in to the designated operator terminal. To enable or disable the security class, you must have SECURITY privilege.
- To designate an operator terminal in batch or SYSTARTUP, you must assign SYS$COMMAND to a valid terminal device.
2.4.2 Starting OPCOM
The OPCOM process starts automatically during system startup, unless it is disabled. You might need to start OPCOM interactively if a software problem causes the process to fail and prevents OPCOM from restarting automatically.
To start OPCOM, enter the following command from the system manager's account (SYSTEM):
If a software problem causes OPCOM to fail, contact your Digital support representative. Be sure to keep the process dump file named SYS$SYSTEM:OPCOM.DMP. (When OPCOM fails, it creates this file.)
2.4.3 Sending Messages to Users
To broadcast a message to users, enter the DCL command REPLY as follows:
For example:
Use the following qualifiers to control OPCOM messages:| Description | |
|---|---|
| /ALL | Broadcasts a message to all terminals that are attached to the system or cluster. These terminals must be turned on and have broadcast-message reception enabled. |
| /BELL | Rings a bell at the terminal receiving a message when entered with the /ALL, /TERMINAL, or /USERNAME qualifier; two bells when entered with the /URGENT qualifier; and three bells when entered with the /SHUTDOWN qualifier. |
| /NODE[=( node-name[,...]) | Broadcasts a message to the local cluster node only, or to a node or nodes you specify. |
| /SHUTDOWN | Sends a message beginning 'SHUTDOWN...'; if used with the /BELL qualifier, rings three bells at terminals receiving the message. |
| /TERMINAL=( terminal-name[,..]) | Broadcasts the message to the specified terminals. |
| /URGENT | Broadcasts a message beginning 'URGENT...'; if used with the /BELL qualifier, rings two bells at terminals receiving the message. |
| /USERNAME=( username[,...]) | Broadcasts a message to all terminals at which users are logged in to the system (or cluster), or only to the terminals of the specified users. |
For more information, see the OpenVMS DCL Dictionary.
Examples
The REPLY command in the following example sends a message to all users logged in to node WLDWND. When the message is displayed, a bell rings at the terminal.
The REPLY command in the following example sends a message to the user logged in at terminal TTC1. When the message is displayed, a bell rings at that terminal.
2.4.4 Controlling the Use of OPA0: as an Operator Terminal
You can control the use of OPA0: as an operator terminal, whether or not the node is part of an OpenVMS Cluster system, by defining the following logicals in SYS$MANAGER:SYLOGICALS.COM:| Function | |
|---|---|
| OPC$OPA0_ENABLE | Defined as True or False; if True, specifies that OPA0: is to be enabled as an operator terminal. |
| OPC$OPA0_CLASSES | Specifies the operator classes that are enabled for OPA0. The logical name can be a search list of the allowed classes, a comma-separated list, or a combination of the two. |
The logicals take effect the next time you boot the system.
2.4.5 Designating Operator Terminals
Normally, the console terminal (with the device name OPA0:) is automatically an operator terminal except for workstations in an OpenVMS Cluster environment. However, you can designate any terminal as an operator terminal. You can also disable a previously designated operator terminal.
Enabling Operator Terminals
To designate a terminal as an operator terminal, enter the REPLY/ENABLE command at the terminal. For example:
To designate an operator's terminal in batch or in startup command procedures, SYS$COMMAND must be assigned to a valid terminal device.
If your facility is large, there may be several operators, each of whom is assigned to specific tasks. If this is the case, you can specify the classes of messages the operator terminal receives and responds to when you enable the operator terminal, as follows:
The following table describes each keyword:| Description | |
|---|---|
| CARDS | Displays messages sent to the card readers. |
| CENTRAL | Displays messages sent to the central system operator. |
| CLUSTER | Displays messages from the connection manager pertaining to OpenVMS Cluster system state changes. |
| DEVICES | Displays messages pertaining to mounting disks. |
| DISKS | Displays messages pertaining to mounting and dismounting disk volumes. |
| LICENSE | Displays messages pertaining to software licenses. |
| NETWORK | Displays messages pertaining to networks; the keyword CENTRAL must also be specified to inhibit network messages. |
| OPER1 to OPER12 | Displays messages sent to operators identified as OPER1 to OPER12. |
| PRINTER | Displays messages pertaining to print requests. |
| SECURITY | Allows messages pertaining to security events; requires SECURITY privilege. |
| TAPES | Allows messages pertaining to mounting and dismounting tape volumes. |
For example:
Disabling Operator Terminals
A terminal that you designate as an operator's terminal remains enabled even when the operator logs out. To return the terminal to normal (nonoperator) status, enter the REPLY/DISABLE command from the terminal.
Example
The following example designates terminal TTA3 as an operator terminal, enabling it to receive messages concerning printers, magnetic tapes and disks, and messages intended for the central operator. Later, it relinquishes terminal TTA3's ability to receive messages concerning tapes. The terminal still receives and can respond to messages about disks and printers and messages directed to CENTRAL.
2.4.6 Sending Requests to an Operator
In sites where operators are assigned to assist users by mounting volumes and changing printer forms, users can communicate with operators by entering the DCL command REQUEST and the following qualifiers:| Description | |
|---|---|
| /REPLY | Sends a request and requests a reply to the message. Requests sent with this command are issued a unique identification number to which the operator sends the response. The user cannot enter any commands until the operator responds. |
| /TO=( operator[,...]) | If your facility is large, there may be several operators, each of whom has specific tasks. The /TO qualifier lets users send requests to a specific operator. Options are as follows: CARDS, CENTRAL, CLUSTER, DEVICES, DISKS, NETWORK, OPER1 to OPER12, PRINTER, SECURITY, TAPES. |
The DCL commands MOUNT/ASSIST and BACKUP/ASSIST also request operator assistance. For more information, see the following sections:
- For MOUNT requests, see Section 8.5.3.
- For BACKUP requests, see Section 10.9.1.
Example
An operator is monitoring an operator terminal enabled for the PRINTER class. The following PRINT command submits an output job that requires a special print form (/FORM=LETTER). The REQUEST command sends a message to the operator. After completing the request, the operator would send a reply, as explained in Section 2.4.7.
2.4.7 Replying to Operator Requests
In sites where operators are assigned to assist users by mounting volumes and changing printer stock, operators can reply to user requests using the DCL command REPLY and the following qualifiers:| Description | |
|---|---|
| /ABORT= identification-number | Replies to the request specified by the identification number and cancels the request. |
| /PENDING= identification-number | Replies to the request specified by the identification number and prevents the user from entering other commands until the operator fulfills or aborts the request. The current terminal must be enabled as an operator terminal. |
| /STATUS | Reports which classes are enabled, and all outstanding user requests for the terminal from which this command was entered. The current terminal must be enabled as an operator terminal. |
| /TO= identification-number | Replies to the request specified by the identification number and completes the request. The current terminal must be enabled as an operator terminal. Note that you can also use a variation of the REPLY/TO command in response to a MOUNT/ASSIST and BACKUP/ASSIST commands. For more information, see Section 8.5.3 and Section 10.9.1. |
An operator working with magnetic tapes would also use additional REPLY qualifiers specific to magnetic tape operations. For more information, see Section 8.8.2.4. For detailed information on the REPLY command and its qualifiers, see the OpenVMS DCL Dictionary.
Example
In the following example, the REPLY/TO command replies to operator request number 5, issued by user ROBINSON. The MOUNT device is switched to DUA4, and the user is notified.
On VAX systems, the command procedure SYS$UPDATE:VMSKITBLD.COM allows you to duplicate system files from an existing system disk on another disk.
On Alpha systems, procedures similar to those in the VMSKITBLD.COM procedure are performed by the AXPVMS$PCSI_INSTALL.COM procedure. See Section 3.1.2 and also the OpenVMS Alpha Version 7.1 Upgrade and Installation Manual.
Opcom Activate Password Execution Software
The SYS$UPDATE:VMSKITBLD.COM procedure offers the following options:| Description | For More Information | |
|---|---|---|
| BUILD | Builds a new common system disk after destroying all existing files on the disk. | Section 2.5.1 |
| COPY | Copies the operating system files to an existing disk without destroying nonsystem files that are currently on the disk. | Section 2.5.2 |
| ADD | Adds a new system root directory to an existing system disk. | Section 2.5.3 |
| Description | |
|---|---|
| Source disk | The disk from which you copy system files. The source disk must be an existing system disk. |
| Target disk | The disk to which you move the system files. |
Caution
Do not attempt to use VMSKITBLD with the current system disk as the target disk. VMSKITBLD.COM deletes files that are required for a running system.2.5.1 Using VMSKITBLD.COM to Build a New System Disk
At some point, you might want to create a new system disk. For example, suppose that your existing system disk is an RA81 disk. If you purchase a larger RA90 disk and want to use it as your system disk, you could use the VMSKITBLD BUILD option to build a new system disk on the RA90 disk.
The existing system disk is the source disk. The new disk is the target disk.
Caution
The VMSKITBLD BUILD option initializes the target disk, deleting all of its previous contents. For information on copying files to an existing system disk without destroying files, see Section 2.5.2.If you want to build your operating system on another disk and you are not concerned about losing the current contents of the target disk, use the BUILD option as described in the following procedure.
How to Perform This Task
- If the source disk is not the current booted system disk, boot the operating system from the source disk.
- Log in to the SYSTEM account.
- Make sure the disk is spun up and on line. If you are using a removable disk, you must also place the disk into the appropriate drive.
- Enter the following command to invoke VMSKITBLD:VMSKITBLD prompts you to choose one of the following options:
- Enter BUILD and press Return. VMSKITBLD displays messages that either prompt you for information needed to complete the operation or inform you of the procedure's status.
- In response to the following prompt, enter the name of the source disk:
- In response to the following prompt, enter the top-level system directory for the source disk:
In most cases, you can choose the default value [SYS0]. - In response to the following prompt, enter the name of the target disk:
- In response to the following prompt, enter the volume label of the target disk:
- In response to the following prompt, enter the top-level system directory:
In most cases, you can choose the default value [SYS0]. - The procedure displays the following message to warn you that the target disk will be initialized and to allow you to stop the procedure:
Make sure it is safe to destroy the contents of the target disk, and enter Y to continue.
When the system displays the dollar sign ($) prompt, the system disk is built. VMSKITBLD automatically dismounts the target disk. At this point, the target disk contains all the operating system files required for a complete system. - Complete the system disk by creating a rights database and network proxy database and configuring the system with appropriate system parameters. For instructions, see Section 2.5.1.1.
- To use the new system disk, reboot the system with the new system disk.
Example
The following example runs VMSKITBLD.COM to build a new system disk. It copies the files on the current system disk to create a new system disk on the DUA0: disk.
2.5.1.1 Completing a System Disk Built with VMSKITBLD.COM
After you create a new system disk using the VMSKITBLD BUILD option, use the following procedure to complete the new system disk:
- Boot the new system disk using a conversational boot. For instructions, see the upgrade and installation supplement for your computer.
- When the SYSBOOT> prompt appears, enter the USE DEFAULT command to boot with default values for all system parameters.
- Enter the CONTINUE command to continue booting.
- After the system boots, log in to the SYSTEM account. The password for the system account will be the default password, MANAGER. Make sure you change this password.
- Use the Authorize utility to create a rights database and a network proxy database. For more information, see the OpenVMS Guide to System Security.
- Run AUTOGEN from the SAVPARAMS phase to set appropriate values for system parameters. Be sure to specify the CHECK_FEEDBACK option. See Section 14.5 and the AUTOGEN section of the OpenVMS System Management Utilities Reference Manual for detailed information on running AUTOGEN.
To reboot from the former system disk, specify REBOOT as the end phase when invoking AUTOGEN.
To reboot the system from the new system disk, specify SHUTDOWN as the end phase and reboot manually, specifying the new system disk.
Example
2.5.2 Using VMSKITBLD.COM to Copy System Files to an Existing Disk
Opcom Activate Password Execution Windows 10
You can use VMSKITBLD to copy the operating system files to a target disk without deleting the files already existing on the target disk. For example, if you accidentally delete a large number of system files from a system disk, you can use VMSKITBLD to copy the system files from another system disk.
Previous | Next | Contents |Opcom Activate Password Execution Download
[Home]Opcom Activate Password Execution Command
| [Comments] | [Ordering info] | [Help]Opcom Activate Password Execution Button
Copyright © Digital Equipment Corporation 1996. All Rights Reserved.